Crypto Funding Rates: How They Work and What They Cost

A crypto funding rate is a periodic payment between traders who hold long and short positions on a perpetual futures contract. When the rate is positive, longs pay shorts. When it is negative, shorts pay longs. The exchange does not keep the money. The payment exists to pull the perpetual price back toward the spot price, and it can become a real cost or a real income depending on which side you are on and how long you hold.
This guide covers the mechanics, the math, how to read positive and negative rates, where to check them, and how funding-rate arbitrage works. It also covers the cost side of the trade, because funding is only one of several costs that decide whether a position pays off.
TL;DR
- A funding rate is a transfer between long and short traders on perpetual futures, built to keep the contract price close to the spot price.
- Positive rate: longs pay shorts. Negative rate: shorts pay longs. Your payment is the position size multiplied by the rate, charged at each settlement.
- Settlement intervals differ by venue, so convert rates to an annualized figure before comparing them.
- Funding is a sentiment gauge, but it is a context signal, not a trade trigger.
- Funding adds to your holding cost, so add it to spread, commission and slippage when you judge a trade.
Table of Contents
- What a crypto funding rate is
- Who pays and who receives
- How crypto funding fees are calculated
- Settlement intervals and why they differ
- Reading funding rates as a sentiment signal
- How funding affects the cost and risk of a position
- Where to check current and historical funding rates
- Funding-rate arbitrage: how it works and what limits it
- Applying this on a CFD account
- Trade crypto with transparent costs
- FAQ
- Sources
What a crypto funding rate is
A traditional futures contract expires. On expiry, its price is forced to meet the spot price. A perpetual contract never expires, so it needs another way to stay anchored. That mechanism is the funding rate.
According to CoinGlass, funding adjusts the holding cost of long and short positions to encourage arbitrage and bring the perpetual contract back toward its underlying spot price. If the perpetual trades above spot, holding a long gets more expensive and holding a short gets cheaper. That change pushes traders to sell the perpetual, which closes the gap.
The key point for a newcomer: funding is not a fee charged by a broker or exchange for the service. It is money moving from one group of traders to the other. The venue only runs the schedule.
Who pays and who receives
Funding is a zero-sum transfer between the two sides of the market. Laevitas describes it this way, and notes that the rate grows as the perpetual price moves further from the index price.
The rule is simple:
| Funding rate | Who pays | Who receives | What it usually suggests |
|---|---|---|---|
| Positive | Longs | Shorts | The perpetual trades above spot; buyers are more aggressive |
| Negative | Shorts | Longs | The perpetual trades below spot; sellers are more aggressive |
| Near zero | Almost no one | Almost no one | Perpetual and spot are roughly aligned |
You pay or receive funding only if you hold a position at the moment of settlement. Open and close a trade between two settlements and you owe nothing for funding. Hold through one and you pay or receive that payment, whatever your profit or loss on the trade.
What happens if the funding rate is positive?
If you are long, you pay. If you are short, you receive. A persistently positive rate means the market is crowded on the long side, and holding that crowd position carries a running cost.
What happens if it is negative?
The flow reverses. Shorts pay and longs receive. A long position in a negative-funding market earns a small payment for as long as the condition lasts, which partly offsets other costs. A short pays.
How crypto funding fees are calculated
The exact formula is set by each venue, but most follow the same structure. As Coingape summarizes it, the rate is generally an interest-rate component plus a premium index. The premium index measures how far the perpetual price sits from the spot or index price. The interest component is usually a small fixed baseline.
Your payment at each settlement is then:
Funding payment = position value × funding rate
Position value is the notional size of your trade, not the margin you posted. That is the part that surprises beginners. Leverage multiplies the funding cost as it multiplies everything else.
A worked example
Say you hold a long perpetual position with a notional value of $10,000, and the funding rate at settlement is 0.01%.
- Payment per settlement: $10,000 × 0.0001 = $1.00
- If settlements happen three times a day, that is $3.00 a day
- Over 30 days at the same rate, about $90
That is 0.9% of your notional over a month, from a rate that looks tiny on a screen. If you posted $1,000 of margin for 10x leverage, the same $90 equals 9% of your margin. Rates rarely stay constant, and in strongly trending markets they can run far higher than this example. The example only shows how a small number compounds.
Settlement intervals and why they differ
Venues do not all settle at the same pace. Coingape notes that intervals commonly fall between one and eight hours depending on the exchange. An eight-hour schedule means three settlements a day. A one-hour schedule means 24.
This matters because a rate quoted per interval is not comparable across venues. A 0.01% rate paid every eight hours is a very different cost from 0.01% paid every hour. The fix is to annualize.
Rho Labs documentation gives the convention: annualized funding APR equals the current funding rate multiplied by settlements per day, multiplied by 365.
| Per-settlement rate | Settlements per day | Annualized (rate × settlements × 365) |
|---|---|---|
| 0.01% | 3 (every 8 hours) | 10.95% |
| 0.01% | 24 (every hour) | 87.6% |
| 0.005% | 24 (every hour) | 43.8% |
| -0.01% | 3 (every 8 hours) | -10.95% |
The annualized number is a comparison tool, not a forecast. Funding changes at every settlement, and the figure assumes today’s rate persists for a year.
Reading funding rates as a sentiment signal
Because funding rises when the perpetual trades above the index, traders use it as a quick read on positioning. Laevitas describes funding as an indicator of market sentiment as well as a transfer mechanism.
A simple way to read it:
- High positive funding: many traders are paying to stay long. The trade is crowded, and a sharp pullback can hurt leveraged longs hardest.
- High negative funding: many traders are paying to stay short. A squeeze higher can hurt them.
- Funding flipping sign: positioning is shifting. It is worth watching alongside price.
- Funding near zero while price trends: the move may be less leveraged than it looks.
Treat this as context. Extreme funding can persist for days in a strong trend, so it does not tell you when to enter or exit. Pair it with price structure. Traders who map key technical levels such as support and resistance can check whether a funding extreme lines up with a price area where reversals have happened before. Funding says how crowded a trade is. Levels say where price has reacted.
How funding affects the cost and risk of a position
Funding is one line in a longer cost list. For a perpetual position, the full cost of a trade includes:
- Spread: the gap between buy and sell prices when you enter and exit.
- Commission: charged per trade or per lot, depending on the account.
- Slippage: the difference between the price you expected and the one you got.
- Funding: accrued for every settlement you hold through.
For a scalper in and out within minutes, funding may be zero and execution quality is the whole story. For a swing trader holding for weeks, funding can outweigh the spread. This is why the holding period decides which cost deserves your attention.
There is also a risk side. Paying funding steadily drains margin on a leveraged position, which brings the liquidation price closer even if the market has not moved against you. Check the funding schedule before you size a position you plan to hold.
Practical habits that keep funding under control
- Check the current rate and the next settlement time before you open a position you plan to hold.
- Convert to an annualized figure when you compare venues with different intervals.
- Size the position by notional value, not by margin alone.
- Close or reduce before settlement if the expected funding cost outweighs your expected edge.
- Review funding history for the instrument, since some contracts stay positive for long stretches.
Where to check current and historical funding rates
You have three practical places to look:
- The venue’s own contract page. Perpetual futures venues usually show the current rate, a countdown to the next settlement and a funding history for each contract. This is the rate that will actually be charged.
- Data aggregators and analytics dashboards. These show funding for many contracts side by side, plus averages and heatmaps. They are useful for spotting which assets carry the highest rates, which is what many readers mean when they ask which coin has the highest funding rate. The answer changes by the hour, so check a live table.
- Your own log. Track funding paid and received per trade. Over a month it shows whether funding helps or hurts your results.
When you read history, look at the average over several days and not just the latest print. A single settlement can spike and then normalize.
Funding-rate arbitrage: how it works and what limits it
Because funding is a transfer between sides, some traders try to collect it without taking price risk. The classic version is called cash-and-carry. When funding is strongly positive, a trader buys the asset on the spot market and shorts the same amount in perpetuals. Price moves cancel out, since the long spot and short perpetual offset each other. The trader collects the funding paid by longs.
The same idea can run across venues: short where funding is high, long where it is low, and capture the difference.
The return is real only after costs and risks:
- Trading costs: spread and commission on both legs, on entry and exit.
- Funding changes: the rate can drop or flip negative after you enter, turning income into expense.
- Margin and liquidation risk: the short leg is leveraged. A sharp rally can push it toward liquidation before the spot leg’s gain can be used.
- Capital tied up: you need funds on both legs, which lowers the effective return.
- Execution gaps: if the two legs do not fill at the same moment, you carry price risk in between.
The quoted annualized yield on a dashboard is a starting point. Subtract every cost above before you decide the trade is worth it. Speed matters too, because the two legs need to be opened close together, which is one reason execution quality matters to this style.
Our perspective
We see funding rates as one of the clearest reminders that trading cost is bigger than the spread on the screen. A position can look cheap to open and still bleed through holding costs. Traders should look at the whole cost picture before they trade: spread, commission, slippage and any carry charge.
That is the reason we built our platform around execution. Our MitraNet™ technology is designed to deliver execution in under 30 milliseconds with direct access to Tier-1 liquidity, because every pip of slippage is a cost you pay before funding or anything else begins. For crypto traders who enter and exit quickly, tight pricing and fast fills are the costs you can control most directly.
We also publish our pricing so you can model a trade before you place it. Our accounts page lists the commission and markup structure, with no minimum deposit and instant deposits, so a trader can start at a size that suits them and see the numbers up front.
Partners
Applying this on a CFD account
Perpetual futures are one way to trade crypto price moves. Crypto CFDs are another, and the cost structure differs. If you are weighing the two, our guide to futures versus CFDs walks through the differences in costs and risks. The useful habit carries over from funding rates: list every cost before you trade, then match the holding period to the cost that matters most.
If you trade short term, speed and slippage are the costs to watch, and our piece on low latency trading explains what execution speed means in practice. If you hold longer, compare account types, and our comparison of the raw spread and standard account shows how the cost structure changes with the account you choose.
Leveraged trading can also move against you quickly. Our explanation of negative balance protection covers what it covers and where it stops.

Trade crypto with transparent costs
At Mitra Markets, we offer an Edge Account and a Standard Account across forex, commodities, indices and crypto CFDs. The commission listed on our accounts page is $7 per lot, alongside the spread and markup structure shown there. There is no minimum deposit, and deposits are instant. Our platform is MetaTrader 5 compatible, with advanced charting and algorithmic trading support.

See which account fits your trading style on the accounts page, or browse the markets we offer. Trading leveraged products carries risk, and you can lose more than you expect if the market moves against you, so size positions with care.
FAQ
What is a good funding rate in crypto?
There is no single good rate, because it depends on your side. A rate near zero means low carry cost. If you are long, a negative rate pays you. If you are short, a positive rate pays you. Compare rates after converting them to an annualized figure.
How often do you pay funding?
It depends on the venue. Intervals commonly run from one to eight hours, according to Coingape. You pay or receive only if you hold the position at the settlement time, so check the schedule on the contract page before you open a trade.
Is the funding fee paid to the exchange?
No. In a standard perpetual contract, funding passes between long and short traders, as Laevitas describes. The venue sets the schedule and the formula, but the payment moves from one side of the market to the other. Trading commissions and spreads are separate costs.
Can funding rates predict price?
Not reliably. Funding shows how crowded one side of the market is, which helps you judge risk. Extreme readings can last through a long trend, so use funding together with price action and your own risk limits instead of as a stand-alone signal.
How do I compare funding between exchanges?
Convert each rate to an annualized figure by multiplying the per-settlement rate by settlements per day and by 365, the convention shown in the Rho Labs documentation. Then check the history, since a single reading can mislead.
Sources
- Funding rate | CoinGlass
- Funding Rate | Laevitas User Guide
- Funding Rates 101 | Rho Labs Documentation
- What is the Perpetual Futures Funding Rate, and How to Calculate it? | Coingape