DMA vs Market Maker: How Your Orders Are Really Filled

The difference comes down to one question: who is on the other side of your trade? With direct market access (DMA), your order is routed to an exchange or liquidity pool, and the broker is paid a commission or markup. With a market maker, the broker quotes its own prices and usually takes the opposite side of your trade itself. Both models are legitimate, but they differ in price origin, transparency and incentives. This guide shows how each works, where ECN and STP fit in, and what to check before you fund an account.
TL;DR
- DMA: your order goes to a venue’s order book or an aggregated liquidity pool. The broker is not your counterparty and earns a commission or markup.
- Market maker: the broker sets its own bid and ask, often internalizes your order and manages the risk on its own book. Its interests are not automatically aligned with yours.
- ECN and STP are routing labels, not guarantees. ECN usually means commission plus raw pricing. STP usually means orders go to chosen liquidity providers with a spread markup.
- Labels prove nothing. Read the execution policy, ask whether orders are internalized or hedged, and compare the disclosures with your own fills.
Table of Contents
- What DMA trading actually means
- How a market maker works
- DMA vs market maker side by side
- Where ECN and STP fit in
- What about crypto?
- Our perspective
- How to check a broker’s execution model
- Trade with explicit pricing at Mitra Markets
- FAQ
- Sources
What DMA trading actually means
Direct market access gives a trader an electronic link to an exchange’s order book. Investopedia describes DMA as an order placed on the exchange’s books without a brokerage acting as an intermediary on the trade. The broker still provides the software and the connection, but it does not stand between you and the market’s prices.
The London Stock Exchange explains what this changes for a retail investor. Orders placed through DMA go onto the order book the same way an institution’s do. Every order has equal status, ranked by price and time, and the whole market can see it. You also set your own limit price. By contrast, a limit order left with an ordinary broker is not displayed publicly. The broker merely polls retail service providers to see whether any of them will fill it when the market moves past your limit.

How an order travels under DMA
In practice the route has three stops: your trading software, your broker’s risk checks, and the venue you selected. The broker’s checks are not optional. Databento’s microstructure guide notes that truly zero-touch execution, often called naked access, is rare. It is increasingly restricted by frameworks such as SEC Rule 15c3-5 in US equities and MiFID II in Europe. So even “direct” access usually means low-touch execution, with the broker running pre-trade controls on every order.
If you automate order placement, those controls matter to you directly, because position limits and rejected orders will show up in your logs. A practical walkthrough of automated order management helps when you want to see how orders, sizing and risk rules fit together on a platform like MetaTrader 5.

Why traders want DMA
The appeal is about visibility and control:
- You see real market depth rather than a single quote handed to you.
- You can post limit orders that sit publicly and wait for a counterparty.
- The price comes from the market, not from the broker’s own pricing engine.
- The broker’s revenue is visible: a commission or a markup, not a hidden cost buried in the quote.
If you want to understand what depth data does and does not tell you in forex, our guide to the forex order book covers it.
How a market maker works
A market maker quotes both a buy price and a sell price and stands ready to deal at them. In a traditional exchange setting, that is a service: the firm provides liquidity so that others can trade. In the retail CFD and forex world, the term usually means something more specific. The broker is a dealing desk, sometimes called a B-book model. It builds its own quote, receives your order and acts as the counterparty.
Three features follow from that design:
- The broker is the counterparty. Your buy is its sell. It then decides whether to hold the risk on its own book, offset it against other clients’ orders, or hedge it elsewhere.
- The price is the broker’s price. A market maker is not bound to mirror the underlying market tick for tick. It can set its own quotes, though competition and regulation keep them close.
- Revenue usually comes from the spread. Instead of an explicit commission, the cost is built into the difference between bid and ask.
The conflict of interest, stated fairly
When a broker takes the other side of your trade and does not hedge it, it can profit when you lose. That is a structural conflict. The European regulator ESMA addresses this directly. It says a dealing model whose profit depends on clients losing can create a material conflict, one that may be inseparable from execution. It asks regulators to consider whether such a model can be managed consistently with acting honestly, fairly and professionally.
The same document recognizes hedged and hybrid models too, so the label alone tells you little. A market maker that hedges most flow with outside providers behaves very differently from one that keeps everything in-house. What matters is the broker’s actual policy, and that is something you can read.
DMA vs market maker side by side
| Feature | DMA / agency-style execution | Market maker (dealing desk) |
|---|---|---|
| Who is your counterparty | The market: exchange participants or liquidity providers | Usually the broker |
| Where the price comes from | Real market prices and depth | The broker’s own quote |
| How the broker earns | Commission or a transparent markup | Mainly the spread, sometimes client losses |
| Order visibility | Limit orders can be posted publicly | Orders are private to the broker |
| Conflict of interest | Lower by design, since the broker is paid on activity | Structural, and must be managed |
| Requotes | Not expected when dealing straight into market liquidity | Possible when the quote moves before the fill |
The table shows the typical pattern, not a rule for every firm. Fills can land better or worse than expected in either model, and slippage works in both directions. If you are a scalper, the costs that matter are the total of spread, commission and slippage per round trip, not any single line.
Where ECN and STP fit in
Most traders who search for DMA end up facing three more acronyms. They describe how the broker routes flow, and they sit on a spectrum between pure market making and direct access.
ECN
In an ECN model, your order meets prices from several participants, such as banks, funds and other brokers, in one network. The broker is a no-dealing-desk intermediary and typically charges a fixed commission per lot, while the spread reflects raw market pricing. This is the closest retail forex equivalent of the DMA idea.
STP
In a straight-through-processing model, orders are passed automatically to one or more liquidity providers the broker has selected. There is no internal dealing desk for the trade. The broker typically adds a markup to the spread, and that markup is its revenue.
Market maker
As above: the broker creates its own market and takes the other side.
Where DMA sits
DMA is an access concept: you reach a venue or liquidity pool directly. ECN is how that access is usually delivered in forex. STP is a routing method that can be close to DMA when the liquidity providers are deep and the broker does not internalize. So “ECN vs DMA” is less a contest than two descriptions of similar plumbing. For a deeper look at the practical differences between the two account styles, see our guide to STP vs ECN, and for how to tell a real ECN from a label, how to spot a real ECN broker.
What about crypto?
The phrase “market maker” means two things in crypto, and mixing them up is common.
On an exchange, a market maker is a firm or bot that continuously posts both buy and sell limit orders on the order book. It earns the spread when other traders hit those quotes, and in return the exchange gets tighter spreads, depth and round-the-clock liquidity. This is a liquidity role, not a conflict.
At a broker, the term refers to the dealing-desk model above: the platform is your counterparty. Some large crypto venues run both, an exchange where market makers compete and a retail app where the company acts as counterparty. When you trade crypto CFDs, check which of these you are in, because your costs and your counterparty differ.
If crypto is your main market, fast and consistent execution matters more than the label. Our piece on low latency trading explains what speed actually means for retail traders.
Our perspective
Retail traders have long been handed slower tools and wider uncertainty than professionals get. We built Mitra Markets to close that gap.
Our approach is built around MitraNet™, our proprietary technology designed for execution under 30 milliseconds, and direct access to Tier-1 liquidity. The aim is institutional-grade conditions: fast fills, minimal slippage and pricing you can read in advance, with a published commission of $7 per lot on our accounts page.
We think the right question for any trader is not which acronym a broker uses, but how clearly it shows what you pay and how your order travels. That is why we publish our pricing, support instant deposits and withdrawals, require no minimum deposit and keep paperwork light. Traders on MetaTrader 5 get advanced charting and algorithmic trading on top of that.
For scalpers, forex traders and crypto CFD traders alike, speed and tight pricing are not extras. They are the product.
Partners
How to check a broker’s execution model
Do not rely on “DMA,” “ECN” or “STP” in a broker’s marketing. Work through this checklist instead:
- Confirm the regulated entity. Brokers often operate through different legal entities by region. Know which one holds your account.
- Get the current execution policy. It should name the venues and liquidity providers used for your client category.
- Ask whether orders are internalized, hedged or passed through. This is the single most revealing question.
- Read the rules on price formation, commissions, slippage, requotes, rejections, partial fills, last look and outages.
- Compare the disclosures with your own records. Look at requested versus filled prices, execution times and how often slippage is positive versus negative.
The last step is the one most traders skip. A small live account over a few weeks tells you more than any brochure. Log each fill, and watch execution during news releases, when differences show up most.
A related point is how a broker combines several sources. Our explainer on liquidity aggregation shows what to look for when a broker says it pools prices from multiple providers.
Matching the model to your style
- Scalpers care about tight, consistent pricing and fast fills. Commission plus raw pricing and low latency usually suit them, because the cost is explicit and easy to model.
- Swing and position traders are less sensitive to a fraction of a pip, so they can weigh convenience and total holding costs more heavily.
- Algorithmic traders need predictable execution and no surprise rejections. Test the platform’s behavior under your own order sizes and frequency.
- Crypto CFD traders should confirm trading hours, how prices are formed in fast markets, and who the counterparty is.
Trade with explicit pricing at Mitra Markets
If the points above match what you want, our accounts are built around them: low-latency execution under 30 ms through MitraNet™, direct access to Tier-1 liquidity, MetaTrader 5 compatibility, instant deposits and withdrawals, and no minimum deposit. Our published commission is $7 per lot, and you can compare the Edge and Standard accounts on one page.

See the Edge and Standard account details to compare pricing, or browse the forex, commodities, indices and crypto CFD markets you can trade.
FAQ
What is the main difference between DMA and a market maker?
With DMA your order reaches an exchange or liquidity pool, and the broker earns a commission or markup without being your counterparty. A market maker quotes its own prices and usually takes the other side of your trade. The result is a different price source, different transparency and a different alignment of interests.
Is a market maker broker a bad choice?
Not automatically. Many are well regulated and offer fair pricing, and some hedge much of their flow. The conflict of interest is structural, so the broker’s execution and hedging policy is what you should read. Pick the model that fits your trading style and cost profile.
Is ECN the same as DMA?
They overlap but are not identical. DMA describes direct access to a venue’s order book or pool. ECN is the usual way forex brokers deliver something similar: a no-dealing-desk network where orders meet prices from multiple participants, with a commission. Always confirm the routing in the execution policy.
Does DMA guarantee no slippage or requotes?
No. Dealing straight into market liquidity avoids the quote being refreshed by a dealer, but prices can still move between your click and the fill. Slippage can be favorable or adverse, and fast execution reduces it without removing it.
How can I tell if a broker really offers DMA?
Check the regulated entity, read the execution policy, ask whether orders are internalized or hedged, and compare disclosures with your own fill records. A name on a webpage is not evidence of routing.
Sources
- Understanding Direct Market Access: Uses and Key Benefits (Investopedia)
- Direct Market Access (DMA) | London Stock Exchange
- What is direct market access (DMA)? | Databento Microstructure Guide
- ESMA Questions and Answers on CFDs and other speculative products under MiFID