Forex Scalping Strategies: 5 Setups, Pairs and Risk Rules

Forex scalping works when three things line up: a setup with clear entry and exit rules, a liquid pair at an active hour, and trading costs small enough that a 3 to 6 pip target still pays. The setups below are the ones scalpers use most. The sections after them explain why the last item, cost and execution quality, usually decides whether a good setup makes money. That is where an execution-focused broker such as Mitra Markets, with its sub-30 millisecond MitraNet™ execution, fits into a scalper’s routine.
TL;DR
- Scalping means taking many short trades for a few pips each. Your edge is the setup, but your result depends on spread, commission and slippage.
- The five setups that cover most scalping are range reversion, momentum breakout, moving-average pullback, news-spike fade and order-flow-style tape reading on the 1-minute chart.
- Trade the most liquid pairs (EUR/USD, USD/JPY, GBP/USD) during the London and New York overlap, when spreads are tightest and moves are cleanest.
- Risk a small fixed share of the account per trade, set a daily loss cap, and always place a stop.
- Execution speed and low markup matter more to a scalper than to anyone else, because costs are paid on every trade.
Table of Contents
- What forex scalping is, in plain terms
- Five forex scalping strategies
- The best pairs and hours for scalping
- Why costs and execution decide scalping results
- Scalping risk management
- Choosing an account for scalping
- Our perspective
- Start scalping with execution built for it
- FAQ
- Sources
What forex scalping is, in plain terms
Scalping is a style of trading in which you open a position, hold it for seconds to a few minutes, and close it for a small gain. A “pip” is the standard unit of price movement in forex (0.0001 on most pairs, 0.01 on yen pairs). A typical scalp targets somewhere around 2 to 10 pips, so you need a high number of trades and a good win rate or a favorable reward-to-risk ratio to make it add up.
Three terms come up constantly:
- Spread: the gap between the buy price and the sell price. You pay it the moment you enter.
- Commission: a fixed fee per lot that some account types charge on top of a very tight spread.
- Slippage: the difference between the price you clicked and the price you got filled at. Our guide to slippage and how to control it covers the mechanics.
Because a scalper may place 20 or more trades in a session, a half-pip of avoidable cost per trade is not a rounding error. It is often the entire profit margin.
Five forex scalping strategies
Every strategy below needs the same discipline: a defined entry, a stop-loss placed before you enter, and a target that is at least as large as the stop. Test any of them on a demo account first to learn the pace before you commit real funds.
1. Range reversion on the 5-minute chart
When price is moving sideways between a clear high and low, usually during the Asian session or a quiet midday, scalpers fade the edges.
- Setup: mark the last two to three hours’ high and low. Add a 14-period RSI (relative strength index, a momentum gauge from 0 to 100).
- Entry: sell when price touches the top of the range and RSI is above 70. Buy at the bottom with RSI below 30.
- Stop: a few pips beyond the range edge.
- Target: the middle of the range, then the opposite side if momentum fades.
- Where it goes wrong: a range ends. If price closes a 5-minute candle outside the box, step aside. Fading a breakout is how small accounts take large losses.
2. Momentum breakout
This is the setup most guides lead with. Price compresses, then moves quickly. You join the move rather than fade it.
- Setup: find a tight consolidation of 10 to 20 candles on the 1-minute or 5-minute chart, ideally just before the London open or the New York open.
- Entry: a candle closing beyond the consolidation high or low, ideally with a visible jump in volume.
- Stop: the other side of the consolidation, or the midpoint if the range is wide.
- Target: one to two times the stop distance.
- Where it goes wrong: false breakouts. Wait for the candle close, not the first touch, and accept that you will sometimes enter a few ticks later.
Breakout scalping is where fill speed counts most. When price is moving fast, a delay of even a fraction of a second can turn into a worse entry. Our piece on what low latency really means for retail traders explains how to think about it.
3. Moving-average pullback with the trend
This is a calmer setup that suits traders who find breakouts too frantic.
- Setup: use a 20-period and a 50-period exponential moving average (EMA, an average that weights recent prices more) on the 1-minute or 5-minute chart. Only trade in the direction of a higher timeframe trend, for example the 15-minute chart.
- Entry: in an uptrend, buy when price pulls back to the 20 EMA and a bullish candle forms. In a downtrend, mirror it.
- Stop: just beyond the 50 EMA or the pullback low.
- Target: the previous swing high or low.
- Where it goes wrong: the EMAs flatten and cross repeatedly. When they are tangled, there is no trend to trade with.
4. News-spike fade
Around scheduled releases such as US nonfarm payrolls or inflation data, price often overshoots and then partly retraces within minutes.
- Setup: know the release time, and do not hold a position through the release itself.
- Entry: after the first spike, wait for the first candle that fails to extend and closes back inside the spike.
- Stop: beyond the spike extreme.
- Target: a partial retracement, often a third to a half of the spike.
- Where it goes wrong: spreads widen and fills slip around releases. This is the highest-cost environment in forex, so it rewards fast, clean execution and punishes oversized positions.
5. 1-minute scalping with a three-part filter
The 1-minute chart is the most searched scalping timeframe because it offers the most signals. It also produces the most noise, so a filter matters more than the trigger.
- Direction: the 5-minute chart shows price above (long) or below (short) its 50 EMA.
- Timing: you are inside the London session, the New York session or the overlap between them.
- Trigger: on the 1-minute chart, a pullback to the 20 EMA followed by a candle that closes in the trend direction.
Set a fixed target (for example 5 pips) and a stop of about the same size or slightly smaller. If your stop is routinely hit before the target, the usual fix is to trade less often, not to add more indicators.
A common rule of thumb is to skip any 1-minute signal that disagrees with the 5-minute direction. It cuts the number of trades and removes many of the weakest ones.
The best pairs and hours for scalping
Scalpers prefer pairs where the spread is smallest and price moves in an orderly way:
| Pair | Why scalpers use it | Best hours |
|---|---|---|
| EUR/USD | Deepest liquidity, typically the tightest spreads | London and New York overlap |
| USD/JPY | Smooth trends, active in Asia and New York | Tokyo session and New York morning |
| GBP/USD | Larger moves per candle, which gives more room for targets | London open and overlap |
| USD/CAD | Reacts to oil and US data | New York morning |
| AUD/USD | Orderly in Asia, tied to commodity and China news | Sydney and Tokyo sessions |
The overlap of the London and New York sessions runs roughly from 8:00 a.m. to noon Eastern Time (the exact window shifts a little when daylight saving changes in the US and Europe on different dates). That is when most volume is traded, spreads are generally at their tightest, and price tends to travel in clean legs instead of random chop.
Exotic pairs and thin crosses can look attractive because they move more. For scalping, the wider spread usually eats the extra movement. If you trade crypto CFDs, commodities or indices, the same logic applies: scalp the instrument and the hour with the most activity.
Why costs and execution decide scalping results
Take a concrete example. On EUR/USD, one pip on a standard lot (100,000 units) is worth about $10, and on a micro lot (1,000 units) about $0.10. Our guide to lot sizes shows how to convert between them.
Suppose your target is 5 pips and your stop is 5 pips, and you win 55% of trades. Before costs, 100 trades on a micro lot would produce:
- 55 wins × 5 pips = 275 pips
- 45 losses × 5 pips = 225 pips
- Net: 50 pips, or $5 on a micro lot
Now add a round cost of 1.0 pip per trade. That is 100 pips of cost over 100 trades, which turns +50 pips into -50 pips. The same strategy, the same win rate, the opposite outcome. This is why scalpers obsess over spread, commission and slippage, and why you should compare the all-in cost per trade rather than the spread alone. Our breakdown of forex trading costs covers spreads, commissions and swaps in detail.
Execution matters in the same way. If you click to buy at 1.0850 and the order fills at 1.0852, you have paid two extra pips before the trade starts. On a 5 pip target, that is 40% of the profit.
What to look for in a broker as a scalper
- Execution speed: orders that reach the liquidity provider quickly and fill close to the quoted price.
- Transparent pricing: a clear commission or markup structure, so you can calculate cost per lot before you trade.
- Liquidity depth: access to deep liquidity so larger orders do not move the price against you.
- Platform support: MetaTrader 5 handles one-click trading, depth of market and automated strategies.
- Fast funding and withdrawals: so you can act on a session and take profits out without delay. See our notes on broker withdrawal time.
This is the problem Mitra Markets was built around. Our proprietary MitraNet™ technology is designed for execution under 30 milliseconds, with direct access to Tier-1 liquidity. The accounts page lists a commission of $7 per lot and a 1.0 pip markup, with spreads listed at 0 on the commission structure. On a standard lot, where one pip is about $10, a $7 commission is the equivalent of 0.7 pip, which is easy to fold into your target math before you place a trade.
Scalping risk management
Scalping multiplies the number of decisions you make, so the rules need to be mechanical. These are the ones that matter most.
Fix the risk per trade
Many traders risk between 0.25% and 1% of the account on each scalp. With a $1,000 account and a 0.5% risk, you lose about $5 if the stop is hit. With a 5 pip stop, that sets your position size at 1 pip = $1, which is ten micro lots. Our article on micro lot trading shows the pip-value math step by step, and the guide to starting with a small account covers sizing when capital is limited.

Put a stop on every trade
Place the stop when you enter, not afterward. A scalp without a stop is a swing trade that you did not plan, and a few of those can erase a week of small gains.
Set a daily loss cap and a trade limit
A simple version: stop for the day after losing 2% of the account, or after three losses in a row, whichever comes first. Many scalpers also cap trades per session. Overtrading after a loss is the most common way a good setup turns into a bad day.
Know the leverage rules where you trade
Leverage lets you control a larger position with a smaller deposit, and it magnifies losses as well as gains. In the US, retail forex leverage is limited under NFA rules, which set margin requirements by pair type. Rules differ by country and by the entity you trade through, so check the limits that apply to your account before you size positions. Never use the full leverage available. It is a ceiling, not a target.
Avoid the high-cost moments
Skip the minutes around major releases unless the news-spike setup is your plan, and avoid the rollover hour at the end of the New York day, when spreads can widen. Keep a trading journal with the setup, entry, exit, spread paid and slippage, so you can see which strategy works for you and which one only looked good on a chart.
Choosing an account for scalping
A scalper needs to match the account to the style. A commission-based structure, where the spread is very tight and a flat fee is charged per lot, makes your cost easy to calculate and tends to suit higher trade counts. A markup-based structure builds the cost into the spread, which can be simpler for traders who prefer a single number.

Mitra Markets offers an Edge Account and a Standard Account, with commission, spreads and a 1.0 pip markup listed on the accounts page. There is no minimum deposit requirement, deposits are instant, and the platform runs on MetaTrader 5, with its charting tools and support for algorithmic trading. Instruments include forex, commodities, indices and crypto CFDs, listed on the markets page. A rewards program for trading volume rewards the active trading that scalping involves.
Our perspective
Most scalping content treats strategy as the whole story. In our view, it is half of it. A setup tells you when to trade. The broker decides what each trade actually costs you and how closely the fill matches the price you saw.
That is why we built MitraNet™ around speed: execution under 30 milliseconds and direct access to Tier-1 liquidity, the kind of conditions retail traders have rarely been offered. Tight pricing and fast fills are designed to keep slippage low, so a 5 pip target stays close to a 5 pip target.
We also believe the barriers around opening an account should be small. That is why there is no minimum deposit, deposits are instant, and the pricing is published, so you can do the math for your own strategy before you place a trade.
Partners
Start scalping with execution built for it
If your strategy depends on small moves, trade it where speed and pricing are part of the design. A Mitra Markets live account gives you MetaTrader 5, sub-30 millisecond execution through MitraNet™, direct access to Tier-1 liquidity, no minimum deposit and instant deposits. Compare the Edge and Standard accounts on the accounts page, or open the platform from our homepage.

FAQ
What is the best forex scalping strategy?
There is no single best one. Breakouts suit fast sessions like the London open, pullbacks to a moving average suit steady trends, and range reversion suits quiet hours. Pick the one that fits the hours you can watch, then trade it on the most liquid pairs with a fixed risk per trade.
What is the 1-minute scalping rule?
The most common version is to trade only in the direction of the 5-minute trend, only during the London or New York sessions, and only after a pullback candle closes in your favor. Use a fixed stop and a target at least equal to it. The rule is designed to filter out the noise that the 1-minute chart creates.
Which pairs are best for scalping?
EUR/USD, USD/JPY and GBP/USD, because they combine deep liquidity with tight spreads. They are most active when London and New York overlap. Wider-spread exotic pairs add cost to every trade, which works against a small target.
How much should I risk per scalp?
Many traders keep it between 0.25% and 1% of the account, with a daily loss cap such as 2%. Divide the dollar risk by your stop in pips to get the pip value you can trade, then pick the lot size that matches.
Is scalping legal in the US?
Yes, scalping a currency pair is a normal trading style. The word also describes ticket resale, which is a different matter, and we explain the difference in our scalping legality guide.