Slippage Explained: What It Is and How to Control It

Slippage is the difference between the price you expected when you placed an order and the price at which it actually filled. It can cost you money (negative slippage) or save you money (positive slippage), and it comes from two things: how fast the market moves and how much liquidity is available when your order arrives. You cannot remove it, but you can shrink it with the right order type, sensible timing and an execution path built for speed and depth. That last part is what we build at Mitra Markets: MitraNet™ execution under 30 milliseconds connected to Tier-1 liquidity.
This guide covers what slippage means, why it happens, how to calculate it in pips and dollars, and what to do about it in forex, indices, commodities and crypto.
TL;DR
- Slippage is the gap between the price you requested and the price you got. It can be worse (negative) or better (positive) than expected.
- It is caused by price movement between click and fill, and by a lack of liquidity at your price. Fast news and thin markets make it larger.
- It is separate from the spread. The spread is a cost you always pay, slippage is a variable cost or gain that depends on conditions.
- Limit orders protect the price but may not fill. Market orders fill but accept the next available price.
- Faster execution and deeper liquidity reduce how far the price can travel before your order is matched.
Table of Contents
- What slippage means in trading
- Why slippage happens
- How to calculate slippage
- Positive and negative slippage in real data
- Who feels slippage most
- How to reduce slippage
- Our perspective
- Trade with institutional-grade execution
- A quick pre-trade checklist
- FAQ
- Sources
What slippage means in trading
When you press buy or sell, you see a price on the screen. Your order then travels to a trading venue or liquidity provider, and it is matched against whatever is available at that moment. Slippage appears in that split second between your click and the match, when the order meets the liquidity actually available. If the price has moved, or if there is not enough size at the quoted price, you fill somewhere else.
Three points make the definition practical:
- It goes both ways. A buy that fills lower than expected, or a sell that fills higher, is positive slippage. The opposite is negative slippage.
- It is not a fee. Nobody charges you for it. It is the market moving, or running out of size, while your order is in flight.
- It is not the spread. The spread is the bid-ask gap you pay to enter and exit on every trade. Slippage is what happens on top of it.
If you searched for the meaning of slippage in forex specifically, the definition is the same. The only difference is the unit: forex traders usually measure it in pips, while stock and crypto traders often quote it in percent or in price points.
Why slippage happens
Price moves while your order travels
Markets update many times a second. Your order needs time to leave your device, reach the broker’s server, be routed and be matched. In a calm market the price barely changes during that interval. In a fast one, a few milliseconds can be the difference between the price you saw and a price several pips away. This is why the time between click and fill matters, and why we wrote about what speed really means for retail traders.
There is not enough size at your price
Every price level has a limited amount available. If you want to buy 100 units and only 10 are offered at the current price, the remaining 90 must be filled at progressively higher prices. Finery Markets describes this as walking the book. A bigger order walks further. If you want to see how those layers of size look, our piece on the forex order book shows what depth can and cannot tell you.
The effect grows faster than the order does. In a worked example for a small crypto pool, a $100 swap moved the price about 0.10%, a $1,000 swap about 1.06% and a $10,000 swap about 9.10%. Ten times the size produced roughly nine times the impact on the second step and again on the third. Large orders against thin liquidity compound.

Volatility and news
Prices gap around economic releases, central bank decisions and surprise headlines. Liquidity providers widen their quotes or pull them, and the next available price can be well away from the last one you saw. Market opens and thin overnight sessions can do the same. The practical lesson: slippage is not evenly spread through the day. It clusters around events.
Where your order is filled
The path your order takes matters too. Whether an order is passed through to outside liquidity or handled differently affects what price you see and how it is matched. We explain the difference in DMA vs market maker, and how combining several sources of prices deepens the book in liquidity aggregation.
How to calculate slippage
The formula is simple:
- Buy order: fill price minus expected price. A positive result is a worse fill.
- Sell order: expected price minus fill price. A positive result is a worse fill.
A worked example, with illustrative numbers: you want to buy EUR/USD at 1.0850 and the order fills at 1.0852. That is 2 pips of negative slippage. A pip on a USD-quoted pair is 0.0001, so the cost scales with your position size:
| Position size | Units | Approx. value of 1 pip | Cost of 2 pips of slippage |
|---|---|---|---|
| 1 standard lot | 100,000 | $10 | $20 |
| 0.10 lot | 10,000 | $1 | $2 |
| 0.01 lot | 1,000 | $0.10 | $0.20 |
The pip values come from simple arithmetic: units multiplied by 0.0001 on a pair where the dollar is the quote currency. On crosses or pairs with other quote currencies the dollar value differs, so check your platform’s calculator.
So what does 0.01 lot mean? It is one micro lot, 1,000 units of the base currency. A 10-pip move on EUR/USD is about $1 at that size, which is why small accounts feel slippage less in dollars, though not in pips. If you are starting small, our guide to small account forex shows how to size trades around costs like this.

Positive and negative slippage in real data
Slippage is not always a loss. In execution data from a large forex broker for 2025, 34% of orders received a better price and 39% filled worse than requested. The same source reports that 74.1% of limit orders filled at or better than the requested price in the first quarter of 2026. Those figures describe one broker’s flow in specific periods, so treat them as an illustration of how mixed the outcomes are, not as a benchmark for any other venue.
What matters for you is the net effect over many trades. A venue with fast, deep execution tends to show small slippage in both directions. A slow or thin one shows larger swings, and costs add up for anyone placing many orders.
Who feels slippage most
Scalpers. A scalper may target a few pips per trade. One pip of adverse slippage can be a third or more of the intended profit. Speed and tight pricing are the whole game.
News traders. Orders placed into a release meet the thinnest liquidity and the fastest price. Stop orders are especially exposed, because a triggered stop becomes a market order that fills at the next available price, which can be beyond the stop level.
Crypto traders. Crypto trades around the clock and can move sharply with little warning. On decentralized exchanges the effect is even more visible, because price impact depends on pool size. KyberSwap’s documentation notes that when liquidity is split across pools, a trade is larger relative to each pool and slippage rises, and that aggregators try to find routes that weigh swap rates, slippage and gas fees.
Large position traders. Anyone sending size into a market with limited depth will walk the book, whatever the instrument.
How to reduce slippage
1. Pick the right order type
A market order guarantees a fill but not a price. A limit order guarantees a price or better but not a fill. A stop order turns into a market order once triggered. Choose based on what you cannot live without: the entry or the execution. Our guide to limit vs market orders goes through when each fits.
2. Avoid the thinnest moments
If you do not need to trade the minute a major release lands, wait for spreads to settle and quotes to stabilize. If your strategy is built on news, plan for wider fills and size down accordingly.
3. Size your orders to the available depth
Smaller orders walk less of the book. Splitting a large order into several pieces over time is a legitimate way to limit impact, because doubling trade size compounds slippage rather than doubling it.
4. Use an execution path built for speed and depth
The time between click and fill, and the depth of liquidity behind your order, are what you can least control from your desk. That is where a platform makes a difference. Mitra Markets offers low-latency execution under 30 milliseconds through MitraNet™ and direct access to Tier-1 liquidity, which is designed to shorten the window in which price can move and to give your order more size to match against.
5. Set tolerance where the platform allows it
Some platforms let you cap the acceptable deviation. On crypto swaps this is called slippage tolerance. In Binance’s agentic-wallet documentation, for example, the slippage setting defaults to auto and accepts values from 0 to 100, where 2.5 means 2.5%, and an order can fail on-chain because of slippage, thin liquidity, routing or network issues. A tight tolerance protects your price but raises the chance of a failed order. We cover how to pick a number in slippage tolerance in crypto.
6. Know your total cost
Slippage is one piece of what a trade costs. Spreads, commissions and swaps are the others. A tidy way to compare setups is to add them all up per trade, which we lay out in forex trading costs.
Our perspective
Most explanations of slippage stop at the definition and tell you to use limit orders. That is sound advice, but it leaves out the part you cannot fix with an order ticket: how quickly your order is matched and how much liquidity it meets.
That is why we built MitraNet™ around speed. Execution under 30 milliseconds means less time for price to drift between your click and your fill. Direct access to Tier-1 liquidity means your order is matched against institutional-grade depth rather than a thin slice of it. Retail traders have long been offered the tools but not the conditions, and we think conditions are where the real difference shows up.
We also think costs should be easy to read. Our account pricing is published, you can start with no minimum deposit, and deposits are instant. When you know your commission and markup, the only variable left is the market, and you can plan for that.
Partners
Trade with institutional-grade execution
If slippage is eating into your results, the account you trade on is the lever you control. Mitra Markets offers Edge and Standard accounts for forex, commodities, indices and crypto CFDs on MetaTrader 5, with no minimum deposit and instant deposits and withdrawals. The accounts page lists a commission of $7 per lot and a 1.0 pip markup, and you can see the full range on the markets page.

If you are comparing setups, start by reading how orders are filled in our DMA vs market maker explainer, then open an account that matches your style on Mitra Markets.
A quick pre-trade checklist
Before you click, run through this list:
- Is a major release due? If yes, expect wider fills or wait.
- Does the order need a guaranteed price? If yes, use a limit order and accept it may not fill.
- Does the order need a guaranteed fill? If yes, use a market order and size it to the depth available.
- Is the position large? Consider splitting it.
- Have you counted every cost? Spread, commission, swap and likely slippage together decide whether the trade is worth taking.
- Is your stop realistic? A stop is not a guaranteed exit price. Leave room for a fill beyond the level in fast markets, and read what negative balance protection covers so you know how your account is treated in extreme moves.
Trading leveraged products such as forex and CFDs carries a high risk of losing money, and losses can exceed what you expected on a single trade. Only trade with money you can afford to lose, and speak to a licensed financial adviser if you are unsure whether these products suit your situation.
FAQ
What is slippage in simple terms?
It is the difference between the price you expected and the price you got. If you try to buy at 100 and fill at 100.10, you had 0.10 of negative slippage. If you filled at 99.90, you had positive slippage. It happens because prices move and liquidity is limited.
Is slippage the same as the spread?
No. The spread is the standing gap between the buy and sell price, and you pay it on every trade. Slippage is the extra movement between your requested price and your fill. You can have a tight spread and still see slippage in a fast market.
What does 0.01 lot mean, and how much is slippage on it?
A 0.01 lot is a micro lot of 1,000 units. On EUR/USD, one pip is about $0.10 at that size, so 2 pips of slippage cost roughly $0.20. The pip count is the same as on a larger trade, but the dollar impact scales with size.
What is slippage tolerance in crypto?
It is the maximum price deviation you allow before a swap is rejected. Setting it low protects your price but can make the transaction fail, while setting it high helps it go through at a possibly worse price. Our slippage tolerance guide explains how to choose a value.
Can I avoid slippage completely?
Not entirely, since it is a feature of moving markets. You can reduce it with limit orders, careful timing, smaller order sizes and fast execution on deep liquidity. You can read more on these topics in our trading education blog.
Sources
- Forex Slippage Explained: Why Your Fill Price Moves (2026)
- Slippage glossary entry, Finery Markets
- What Is a Liquidity Pool? Crypto & Solana LP Guide
- DEX/DeFi Aggregator, KyberSwap Docs
- Binance agentic wallet market order reference