Crypto Order Types: Market, Limit, Stop and Stop-Limit Explained

An order type is the instruction that tells a venue how and at what price to fill your trade. In crypto there are four you need to know: market (fill now, at whatever price), limit (fill only at your price or better), stop (become a market order once a trigger price is hit) and stop-limit (become a limit order at the trigger). Picking the wrong one is how traders pay more than expected, miss a fill, or watch a protective order trigger and do nothing. Below, each type is explained with a worked example, plus the settings that sit on top of them.
TL;DR
- A market order prioritizes speed: it fills immediately but does not guarantee the price.
- A limit order prioritizes price: it fills only at your limit or better, so it may not fill at all.
- A stop order turns into a market order at the trigger price, and a stop-limit order turns into a limit order, which gives price control but can leave you unfilled in a fast move.
- Time in force settings (GTC, IOC, FOK, GTT) decide how long an order lives and whether it can fill partially.
- Execution speed and liquidity decide how closely a fill matches the price you saw, whichever order type you pick.
Table of Contents
- What an order type actually controls
- Market orders: speed first
- Limit orders: price first
- Stop orders: a trigger that becomes a market order
- Stop-limit orders: a trigger that becomes a limit order
- Take-profit and other conditional orders
- Time in force: how long an order lives
- Choosing an order type: a quick decision guide
- Why execution quality matters for every order type
- Where Mitra Markets fits
- Our perspective
- FAQ
- Sources
What an order type actually controls
Every order answers two questions: how certain do you want to be of getting filled, and how certain do you want to be of the price? You cannot maximize both. A market order gives you certainty of execution and gives up price control. A limit order gives you price control and gives up certainty of execution. Everything else in this guide is a variation on that trade-off.
The definitions here follow the way the U.S. Securities and Exchange Commission’s investor education site describes the basic market, limit and stop orders. It writes about stocks, but the mechanics are the same for crypto, whether you trade spot coins or crypto CFDs (contracts for difference, which let you trade the price move of a coin without owning it).
Two terms come up constantly:
- Bid and ask. The bid is the highest price a buyer is currently offering. The ask is the lowest price a seller will accept. The gap between them is the spread.
- Order book. The live list of resting buy and sell orders at each price. Your order interacts with it. If you want to see how that works in a related market, the guide to the forex order book covers what it shows and what it cannot.
Market orders: speed first
A market order buys or sells right now at the best available price. The SEC notes that it guarantees execution but not the execution price, and that the last-traded price is not necessarily the price your order fills at.
Example. Bitcoin shows $95,000. You send a market buy for 0.5 BTC. If there are only 0.2 BTC offered at $95,000, the next 0.3 BTC fill at $95,010, $95,025 and so on up the book. Your average fill lands above the quote you saw. That gap is slippage.
Use it when getting in or out matters more than a few ticks of price: a breakout you are chasing, a position you must close, or a liquid pair where the spread is tight.
Watch for thin order books, news spikes and quiet overnight hours. Wide spreads and sparse depth make market orders expensive. Our explainer on slippage and how to control it shows how to measure it, and the piece on market liquidity explains why depth changes your fill.

Limit orders: price first
A limit order sets the worst price you will accept. According to the SEC, a buy limit can execute only at the limit price or lower, and a sell limit only at the limit price or higher.
Example. Ether trades at $3,400 and you want to buy a dip. You place a buy limit at $3,300 for 2 ETH. If price never falls to $3,300, nothing happens. If it does, you are filled at $3,300 or better.
Use it when you have a specific entry or exit, you are trading a wide-spread or thin market, or you want to avoid paying the spread by waiting for it to come to you.
Watch for the missed trade. Price can touch just short of your limit and run away, and you are left watching. A limit order can also fill only partly if the book at your price is shallow. For a head-to-head decision, read limit vs market order: which to use and when.
Market vs limit at a glance
| Market order | Limit order | |
|---|---|---|
| Fill certainty | High | Not guaranteed |
| Price certainty | None | Your limit or better |
| Typical cost | Spread plus slippage | Possibly no slippage |
| Best for | Urgency, liquid pairs | Planned entries and exits |
| Main risk | Paying more than expected | Never getting filled |
Stop orders: a trigger that becomes a market order
A stop order, also called a stop-loss, waits until price reaches your stop price, then becomes a market order. The SEC explains that a sell stop sits below the current price and is generally used to limit a loss or protect a profit on something you own, while a buy stop sits above the current price.
Example. You bought BTC at $95,000 and want out if the trade is wrong. You set a sell stop at $92,000. If price trades down to $92,000, a market sell fires. You are out, but the fill might be $91,700 if the market is moving fast.
Use it when protection matters more than the exact exit price. It is the standard tool for capping the loss on a position when you cannot watch the screen.
Watch for gaps and fast candles. Because the triggered order is a market order, it takes whatever liquidity is available. Crypto trades around the clock, so there is no closing bell to hide behind. Price can jump through your stop level in a single move.

Stop-limit orders: a trigger that becomes a limit order
A stop-limit order has two prices. The stop price is the trigger. The limit price is the worst price you will accept once triggered. The SEC’s investor bulletin on stop, stop-limit and trailing stop orders says that once the stop price is reached, a stop-limit order becomes a limit order that executes at the specified price or better.
Example. You hold 1 BTC bought at $95,000. You set a sell stop-limit with a stop at $92,000 and a limit at $91,500. If price falls to $92,000, a sell limit at $91,500 goes onto the book. You will not be sold below $91,500.
Why a stop-limit can trigger and still not fill
This is the question most traders search for. If price drops from $92,100 to $91,000 in one fast move, your stop triggers at $92,000, but by the time your limit order reaches the book the market is already below $91,500. Nobody is buying at your price, so the order sits unfilled while price keeps falling. You keep the position and the loss grows. The protection you thought you had did not execute.
The usual fix is to think about the gap between the two prices:
- A tight gap (stop $92,000, limit $91,900) gives you price control but a higher chance of no fill.
- A wide gap (stop $92,000, limit $90,500) raises the chance of filling, at the cost of accepting a worse price.
For a detailed comparison of the two, see stop vs stop-limit orders: which one to use.
Stop vs stop-limit in one table
| Stop (stop-loss) | Stop-limit | |
|---|---|---|
| Becomes | Market order | Limit order |
| After trigger, fill is | Near certain | Not guaranteed |
| After trigger, price is | Not controlled | Capped at your limit |
| Best when | You must exit | You refuse to sell below a level |
Take-profit and other conditional orders
Many platforms add orders built from the same blocks:
- Take-profit. A resting order that closes a position at a favorable price. It behaves like a limit order on the exit side.
- Trailing stop. A stop that follows price at a set distance as the trade moves in your favor, then stays put when it reverses.
- OCO (one cancels the other). Two linked orders, usually a take-profit and a stop. When one fills, the other is cancelled.
- Bracket order. An entry with an attached stop and target placed together.
The naming differs between platforms, so check how your own platform defines each one before relying on it. Also note that the SEC says stop-type orders may not be offered by every firm.
Time in force: how long an order lives
An order type says what to do. Time in force says how long to keep trying. Paxos’s trading documentation defines the standard values in its FIX API reference: Good Till Cancel (GTC), Immediate or Cancel (IOC), Fill or Kill (FOK) and Good Till Time (GTT).
In plain terms:
- GTC. The order stays active until it fills or you cancel it. Good for a limit entry you want to leave for days.
- IOC. Fill whatever you can right now, cancel the rest.
- FOK. Fill the entire size right now or cancel the whole order.
- GTT. The order stays active until a time you choose.
A GTC stop that you forgot about can trigger weeks later at a price you no longer want. Review resting orders whenever your plan changes.
Choosing an order type: a quick decision guide
Ask three questions before you click.
- Must I be in or out now? Use a market order, or a stop for protection.
- Is there a price I will not cross? Use a limit, or a stop-limit for a protective exit.
- How thick is the book? In thin markets, favor limits and size down. In deep markets, market orders cost less.
| Situation | Sensible choice |
|---|---|
| Breakout, deep market | Market order |
| Buying a pullback | Buy limit |
| Capping a loss, must exit | Stop |
| Protecting a gain, a floor price matters | Stop-limit |
| Leaving an order for days | Limit with GTC |
| Large size, want it all or nothing | Fill or Kill |
Mistakes that cost money
- Using a market order on a thin altcoin and paying a wide spread.
- Setting a stop-limit with the limit so close to the stop that it rarely fills.
- Placing a stop inside normal volatility so noise knocks you out.
- Forgetting resting GTC orders.
- Ignoring fees. A limit order can add a commission that a market order does not, or the reverse, depending on the account.
Why execution quality matters for every order type
Order types describe your intent. The fill depends on what happens after you press the button. Two things matter: how fast the order reaches the market and how deep the liquidity behind it is.
For a scalper, a few tenths of a percent of slippage can erase an entire target. For a stop, a slow fill turns a planned $92,000 exit into $91,700. That is why the route your order takes matters. If you want to understand who actually fills you, read LP vs broker: who sets the price, liquidity aggregation and what to check and DMA vs market maker. If you trade through a tool that lets you set a tolerance, the page on slippage tolerance in crypto covers what to set.
Where Mitra Markets fits
We built Mitra Markets for traders who care about the difference between the price on the screen and the price they get. Our proprietary MitraNet™ technology is designed for execution under 30 milliseconds, with direct access to Tier-1 liquidity, and the platform is compatible with MetaTrader 5, with its advanced charting and algorithmic trading.
On the Edge and Standard accounts, commission is $7 per lot, and there is no minimum deposit. You can trade forex, commodities, indices and crypto CFDs from the same account. See the full range on the markets page, or start at Mitra Markets.

Deposits are instant, and a rewards program applies to trading volume.
Our perspective
Most guides treat order types as a menu. We treat them as a promise you make to the market, and a promise only holds if the execution behind it is fast and deep.
A stop-loss is a good example. On paper it is a risk control. In practice it is a market order waiting for a trigger, and what you receive depends on how quickly it reaches liquidity and how much liquidity it finds. That is why we put so much into low-latency execution and direct Tier-1 liquidity access. Retail traders have long been denied the speed and tools reserved for professionals, and we think that gap should close.
For scalpers, tight pricing and fast fills decide whether a limit entry or a market exit actually matches the plan. For crypto traders, markets that never close make a clean, quick fill matter even more. Choose your order type on purpose, and trade somewhere your execution supports it.
Partners
FAQ
What are the four main types of crypto orders?
The four most common are market, limit, stop and stop-limit orders. A market order fills now at the best available price. A limit order fills only at your price or better. A stop order becomes a market order at a trigger price, and a stop-limit order becomes a limit order at the trigger.
What is a crypto stop-limit order?
It is an order with two prices: a stop price that activates it and a limit price that caps what you will accept. Once the stop price is reached, it becomes a limit order, so it executes at your limit or better. The trade-off is that it may not fill if the market moves past your limit.
Should beginners use market or limit orders?
Limit orders give beginners more control because you decide the worst price in advance. Market orders are simpler and make sense in deep, liquid markets where the spread is tight. If you use a market order, check the spread and the size of your trade against the available depth first.
What does GTC mean on a crypto order?
GTC stands for Good Till Cancel. The order stays active until it fills or you cancel it, as defined in the FIX standard Paxos documents. It suits long-term limit entries, but review old GTC orders so they do not fill after your plan has changed.
Why did my stop-limit trigger but not fill?
Price most likely moved through your limit before your order reached the book. After the trigger, a stop-limit is only a limit order, so it fills only at your limit or better. A wider gap between the stop and limit prices improves the chance of a fill.
Sources
- Types of Orders, U.S. Securities and Exchange Commission (investor.gov)
- Stop, Stop-Limit, and Trailing Stop Orders Investor Bulletin, SEC (investor.gov)
- New Order FIX reference, Paxos Documentation